top of page

LESER IN THE UNITED KINGDOM

hero_qt_ffs.jpg

The Seetru Quicktester

Simplified Valve Testing

For compliance with pressure systems and safety equipment regulations

We are Seetru in India

This compact, lightweight, and portable design is very robust and able to meet the demands of a busy maintenance workshop or mobile operation. The Quicktester™ can be used with plant-generated air supplies or with mobile bottled gas. This test bench is supplied with a range of adaptors allowing connection between 1/4″ to 1″ BSP as standard, additional adaptors are available increasing the connection sizes up to 2″ BSP. The Quicktester™ is also available with NPT connection adaptors on request.

bugger.jpg

Simplified Valve Testing

  • Simplified valve testing, for compliance with pressure systems safety & equipment regulations.

  • Enables rapid valve testing in complete safety.

  • Highly portable, compact design (subject to suitable compressed air supply).

  • Suitable for use on a wide range of valves.

  • Accurate, unambiguous pressure readout.

  • Very low consumption of supply medium.

  • Easy to use and maintain.

  • Manufactured to quality system compliant with ISO9001.

  • Supplied with comprehensive instructions.

  • Pressure gauges are supplied as optional extras.

  • Can be supplied with a range of thread size adaptors

Image of a Seetru quicktester; a portable safety valve test bench

Safety valve connection

A threaded connection is provided on the manifold unit for a safety valve to protect the air receiver. Safety valves can be supplied as optional extras, contact Seetru for information on our range of safety valves. (An enclosed discharge valve may be preferred where equipment is protected by a fire control system.)

​

Shut-off valve connection for pressure gauge

A connection with a shut-off valve is provided on the manifold unit for a pressure gauge, which can be fitted to monitor the pressure in the air receiver. Pressure gauges can be supplied as optional extras, contact us for information.

​

Integrated inspectors test point

A connection is provided for the connection of an inspector’s pressure test gauge.

​

Fusible plug thermal protection
The GS56 has the facility for a fusible thermal plug to protect the air receiver from over-pressure due to heat (e.g. In the case of fire). The plug fuses at a defined temperature and releases the pressurized air in the receiver. Plugs are supplied as optional extras.

​

Siphon drain valve
An optional siphon drain valve can be supplied with the GS56. This valve is connected to a long tube, which reaches low into the receiver vessel when opened, the pressure in the vessel forces any oil or water out through the tube.

 

Widely accepted worldwide approvals

Accepted by Lloyds for marine applications. Testing can be witnessed by marine approval authorities prior to despatch and certification is provided at extra cost. Compliant with the requirements of the European Pressure Equipment Directive, PED (CE marked).

Our Name & Logo are part of our story
‘See’ the ‘Tru’ Level 

Our logo, representing a ‘clear view’ and the symbol for a valve, reflects our commitment to providing innovative, accurate, and reliable solutions.

Contact Seetru

bottom of page